2. Firmware enables remote control functionality from gimbal via USB communications
With this firmware update, combining the X-S10 with a compatible gimbal that supports remote control functionality will allow users to start / stop video recording, specify exposure settings for video (shutter speed, aperture value, ISO sensitivity and exposure compensation), and make manual focus adjustments. Guilin Zhishen Information Technology Co., Ltd (ZHIYUN) has announced the intention of offering compatible products for the new X-S10 firmware update.
[..]
Wenn Zhiyun jetzt noch die Firmware für den Weebill S anpasst, dann ist es perfekt.
ACHTUNG
Fujifilm X-T4, X-Pro3 and X-E4 Firmware Flawed and Removed from Fujifilm’s Website:
Offenbar sind bugs im update, also warten, bis die Sachen fixed sind.
Jul 1, 2021
FUJIFILM Corporation
To our valued customers
Thank you very much for purchasing and using our products.
We have found a malfunction in the upgraded firmware for the three models posted on our website on June 29 2021. Therefore, we temporarily stopped the disclosure of the firmware.
<Symptom>
In case of PAIRING REGISTRATION is available in SET UP MENU>CONNECTION SETTING>Bluetooth SETTINGS, it is most likely that a camera doesn’t turn on if the eye sensor is used just after you switch it on.
*Note
Removing and inserting a battery gain will recover the symptom.
And this symptom cannot occur if you delete all the pairing registrations.
We plan to release the new firmware for the three models later to fix the symptom.
We would appreciate it if you could understand this situation.
Fujifilm hat für eine ganze Reihe seiner Kameras - genauer gesagt die GFX100, X-S10, GFX100S, X-T3, X-T4, X-E4, X-Pro3 und X-T200 - neue Firmware-Versionen veröffentlicht...
Hab' die 2.00'er Firmware in die X-S10 eingespielt (funktionierte auch ohne Probleme) und dann mit dem Viltrox 33mm 1.4 mal spaßeshalber an den Weebill S angeschlossen.
Und siehe da, auch wenn der Weebill S die X-S10 nicht offiziell supported (und das wohl auch nicht mehr passieren wird da der Weebill S nun aufgrund des Weebill 2 EOL ist), kann ich im Videomodus nun Aufnahme starten/stoppen sowie ISO einstellen. Blende und Verschlusszeit gehen nicht, stört mich aber nicht, da ich diese Werte eh' kaum verstelle und bei der Aufnahme selbst sowieso nie.
Im Fotomodus geht Auslöser (inkl. Autofokus beim halben drücken), ISO Einstellung und Belichtungskorrektur, auch hier gehen Verschlusszeit und Blende nicht.
Witzigerweise allerdings, wenn ich das Fujinon 18-55 2.8-4.0 dran habe geht im Videomodus Aufnahme starten nicht, nur Aufnahme stoppen. Sonst alles genauso wie mit dem Viltrox Objektiv.
Also ich bin zufrieden ... thx an Fuji und Zhiyun.
Danke für diese Info.. Ich schau mir die X-S10 immer noch an.
Einzig, dass sie zuerst viel gut macht von VIDEO spricht und dann
bei 10 bit 4:2 :0 VERSAGT und mir kein 4:2: 2 gibt ist schon der Fail.
Um 1000 oder auch 900 Euro ist es dann eine Poket 4k, also ist dieses
Gerät hier ein gutes 499,- Euro angebot. ( eine zweite Poket 4k)
Die Fujii wäre eine schöne 2k Belieferung gewesen.
Noch bin Ich der Kunde. Okay? Gut. Ich wette SONY wird mit der
Herbst-APSC-wundertüte genau hier ebenfalls wunderbar daneben hauen.
Und das dann in glorreichen schönen ab 1900,- Euro.
GH-6?( 2022-Herbst) Und als gute all In Lösung die S5 auch am Radar.. ich bedanke mich für
Usertests und lese begeistert mit. Danke!
Rechtliche Notiz: Wir übernehmen keine Verantwortung für den Inhalt der Beiträge
und behalten uns das Recht vor, Beiträge mit rechtswidrigem oder anstößigem Inhalt zu löschen.